AGA300 is used for assembling the grommet on sensor cable of automotive wire harness, such as the Wheel Speed Sensor, ABS cable.The machine assembles the grommets automatically once the operator inserts the cable into the first grommet modular. The concept and platform of machine ensure the position and angle of each grommet stable and repeatable.
This is the Grommet Modular which consists of two parts,upper part and bottom part.Each Air Modular equips grommet and cable detection sensor.
| Cable Diameter | 4-10 mm |
| Min Grommet Seperation | 10mm
|
| Processing time | 3-15s (depend on grommet number and cable length) |
| Total cycle time | 5-20s (depend on operator and product) |
| Power supply | 220V 50Hz |
| Compressed air | 5-7 Bar
|
| Dimension L*W*H | 1800*750*2100 mm |
| Weight | 420KG(NET) |
Important Notice:ASIT recommends that samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine
|
