Concept
The stripping length, depth, position, even sequence, all of them are programmable through PC touch panel.It makes easy changeover and special cable processing possible.
Changeover
SC501-PCM is designed for processing the jacket cable and twisted cable, it integrates two functions, stripping and crimping.It is a semiautomatic machine.It can analyze the color of the cables and can monitor each crimping force.Because of its smart design, it saves much time and keeps stable quality.
The module concept is fully applied in SC501-PCM. There is no need to change any modular within wire diameter, For special ones, you just need to change stripping blades and wire guiding modular. This makes high efficiency.
Wire Size | 0.13-2.5 mm2 |
Jacket Stripping Length | ≥20 mm |
Stripping Length | 1-8 mm |
Press Force | 2T |
Press Stroke | 30 or 40 mm |
Machine Processing Time | Approx. 2.3S |
Total cycle time | Approx. 3.8s (Depends on OP)
|
Packing Dimension & Weight | L890*W810*H1690mm 243KG(NET) |
Power & Air | 220VAC 1500W 5~7Bar |
Important Notice:ASTI recommends that samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine |